高壓交聯聚乙烯絕緣電力電纜

        型號:

        電纜導體的最高額定溫度為90℃,短路時(最長持續時間不超過5S),電纜導體的最高溫度不超過250℃。

        關鍵詞:

        高壓交聯聚乙烯絕緣電力電纜

        所屬分類:

        產品描述

          高壓交聯聚乙烯絕緣電力電纜

          HIGH-VOLTAGE XLPE INSULATED POWER CABLE

          執行標準

          IMPLEMENTED STANDARD

          額定電壓35kV及以下銅芯、鋁芯交聯聚乙烯絕緣電力電纜GB/T12706.2-2002,GB/T12706.3-2002,IEC60502-1997

          Rated voltage 35kVand below XLPE insulated,Cu/Al corepower cable GB/T12706.2-2002,GB/T12706.3-2002,IEC60502-1997

          產品用途

          APPLICATION

          本產品適用于額定電壓3~35kV的高壓電力線路輸配電能。

          The product applies to transmission and distributionof highvoltage power lines at rated voltage3-35kV

          使用特性

          SERVICE CHARACTERISTICS

          電纜導體的最高額定溫度為90℃,短路時(最長持續時間不超過5S),電纜導體的最高溫度不超過250℃。

          敷設電纜時的環境溫度應不低于0℃,低于0℃時應先預熱。

          敷設電纜時允許彎曲半徑:單芯電纜不小于電纜外徑20倍;多芯電纜不小于電纜外徑的15倍。

          Rate voltage max is 90℃.at short circuit (duration max ≤5S) ,temperature max is not higher than 250℃.

          The temperature of laying should not be lower than 0℃ , pre-heating is needed if the ambient temp.of laying is lower thano℃.

          The bend radius for laying: the one of single core cable shouldnot be shorter than twenty times of outer diam; the one of mu-lti core should not be shorter than fifteen times of outer diam.

        111111111111111111111111111111111111111111

        歡迎您的留言咨詢

        我們的工作人員將會在24小時之內(工作日)聯系您,如果需要其他服務,歡迎撥打服務熱線:0514-84239996
        伊人一区在线观看,2021国产精品久久无码专区,在线视频中文2021,久久国产二区视频 国产精品制服自慰喷水综专区 国产成人一区二区